Compare fine lettering on a 0.25 mm profile with general-purpose 0.4 mm prints. Match the opening to the filament before choosing.
Fit guide
Choose a nozzle for an installed E3D Revo hotend
Confirm that your machine already has a supported Revo system. Then choose a nozzle for the jobs you actually repeat, such as a finer opening for small features or a standard size that matches a profile you already use.
What to check
- Find the name of the installed Revo hotend or conversion, then look it up in E3D’s compatibility information for the nozzle line.
- If you print several different jobs, compare a multi-size pack with the individual sizes you will use. Record the opening for each nozzle and match it in the slicer before printing.
- Use the cold-swap procedure documented for the Revo system and the material-specific care instructions for the exact nozzle.
Compare products
The 0.4 mm coated nozzle and 0.6 mm high-flow variant answer different needs. Check whether wear or profile flow is the purchase criterion, and compare the openings separately.
Questions about this choice
Can I use a Revo nozzle on an existing V6 heater block?
E3D specifies Revo nozzles for the Revo system and excludes V6-style heater blocks. Identify the hotend currently fitted before buying a refill or choosing a documented conversion.
Which pack makes sense if I mostly print at 0.4 mm?
A single nozzle can be enough if most of your jobs already use a 0.4 mm profile. Pick a variety pack when you can identify a real use and a suitable profile for the other sizes it includes.